Products
Auto Pre-cut Reinforcing Mesh Welding Line
Reinforcing mesh welding lines processing of pre-straight - welded wire mesh machine
Reinforcing mesh welding machine is the specialized equipment for wire mesh building steel, fence and any other mesh.This machine welds the line wires and cross wires of the steel to be solid mesh in the principle of multi-electrode resistance welding. It consists of welded equipment, line and cross wires feeding device, mesh stepping system, mesh laying and convey device, pneumatic system, electrical control system and cooling system. The material can be rolled ribbed steel wire, cold or hot rolled round steel wire.
Main parameter of Reinforcing mesh welding line:
Model | JLGWC-3/6-2500 | JLGWC -5/12-2500 | JLGWC -5/12-3300 |
Diameter | Ф3-Ф6mm | Ф5-Ф12mm | Ф5-Ф12mm |
Max mesh width | 2500mm | 2500mm | 3300mm |
Welded no. | 24 | 24 | 32 |
Capacity of transformer | 1000KVA | 1600KVA | 16×125KVA |
Line wire space | 50-200mm | 100-300mm | 100-300mm |
Cross wire space | 50-200mm | 100-300mm | 100-300mm |
Max. welding frequency | 30-65 Times/min | 30-60 Times/min | 30-60 Times/min |
Utilization factor of transformer | 30% | 30% | 30% |
Work pressure of pneumatic system | ≤0.8Mpa | ≤0.8Mpa | ≤0.8Mpa |
Pressure of cooling water | 0.2Mpa-0.3Mpa | 0.2Mpa-0.3Mpa | 0.2Mpa-0.3Mpa |
Consumption of compressed air | ≥3M3/min | ≥3M3/min | ≥3M3/min |
Load mode of line wire | Pre-cut; straightness ≤3mm/1000mm | Pre-cut; straightness ≤3mm/1000mm | Pre-cut; straightness ≤3mm/1000mm |
Load mode of cross wire | Pre-cut; straightness ≤3mm/1000mm | Pre-cut; straightness ≤3mm/1000mm | Pre-cut; straightness ≤3mm/1000mm |
Typical application of welded wire mesh：
